L'ASSOCIATION CANADIENNE DE MOTOS ANCIENNES
Please contact me if you see any of these 403-585-4426 thx Hans
Circa 1953 Matchless G80 (500cc) motorcycle setup for motocross. Burgundy aftermarket tank made of fiberglass, a Bultaco rear wheel, metal profiles front forks, Suzuki front wheel. rectangular aluminum side and front number plates. Custom oil tank, Mikuni carburator. This bike was in a magazine article, and has a few more pictures there: https://motorcyclemojo.com/2016/12/matchless-motocrosser/ Engine # 53G80S1440C, frame 02-6000, transmission M29361
1970 Husqvarna 400 cross, Red tank says 400 cross on it polished aluminum fenders silver frame, Mostly original, has a huge weld on the right side engine case, and a weld on the left side case where the kickstarter touches the case. the throttle cable is held on with safety wire on the handlebar. Seat foam is extended and the cover is stitched down the back corners (original was 45degrees)Frame # MH3153
1971 Husqvarna 360C enduro , red tank says 360c enduro on it, red rear fender silver frame. has light bezel and key. has the motocross wheels. in the picture the tank is visible.
1975 Honda CR125 Elsinore Orange frame and fenders, black frame reinforced in various places over the original. Special DG head, DG fiberglass tank, and FMF exhaust pipe. Mikuni carb, extra long shocks, home made chain guide. Not running has a hole in the bottom of the engine.
1976 Husqvarna 175 Cross Country red tank silver frame. has 78 250 pipe that goes across the top of the motor, also FMF silencer from a newer bike clamped to the frame. Frame# ML07114
1973-74 Honda CR250 Motors and parts - I've included a couple of pictures of honda engine cases and engines that have engine numbers. They were in totes, not sure how many.
Contact the CVMG
Contact Web Support
How To Instructions
Apricot Release History
Copyright © 2020 Canadian Vintage Motorcycle Group